FlexScan3D works with a variety of hardware to meet the cost and performance characteristics for most scanning applications.

Point Density

Camera / Projector	Max Points	Average Points
800x600 Resolution Projector 6.1 MP Camera	1.02 Million	700k
1024x768 Projector 10 MP Camera	2.65 Million	1.5 Million

Scan Time

Actual time per scan is dependent on specific camera equipment used, these are

	Draft Scan	Normal Scan	Quality Scan
Still Camera	3-8 seconds	5-10 seconds	1-2 Minutes
Video Camera	Less than 1 second (.3 seconds)	Less than 1 second (.5 seconds)	5-10 Seconds
Web Cam	1-2 seconds	2-3 seconds	30+ seconds

Scanning Field of View and Precision

These are standard settings and will vary by hardware configuration - FlexScan3D will supports a number of scanning window and accuracy configurations. These values were tested with used with a 1024x768 Projector and 6 MP Camera

Scanning Window	Scanning Precision
320mm x 240 mm x 50 mm	+/- .025mm
640mm x 480mm x 70mm	+/- .05mm
960mm x 720mm x 90mm	+/- .075mm
1280mm x 960mm x 110 mm	+/- .1mm

Texture Quality

Directly maps textures from cameras. (Consumer still cameras vary from 6 to 12 megapixels)

• 32 Bit JPEG
• Camera RAW

File Formats

• asc,xyz, obj, ply, stl, vrml

Scans per Object

• 4 Minimal scans for a 360 view
• 8 Recommendedfor a full 360 view
• Multi-Camera configurations allow scanning in parallel